Alive Air Air Purifier Owner's Manual download pdf (Page 7)

Alive Air 9-Stage Air Purifier Owner’s Manual

Please watch our 7 'Video Instructions' on all aspects of using and setting up the Alive Air Purifier.

www.aliveairpurifier.com/alive-air-video-help.

Any questions, feel free to call and we'd be glad to help.1-800-215-1689

Sometimes the sensor is not as sensitive when first purchased or after being unplugged for over

a week. Its sensitivity will begin to increase after one to two days of operation.

PLEASE NOTE: After you have a 'clean air reference' for the AUTO SENSOR, your air purifier

is made to run 24/7, summer, winter, spring, fall, windows open/windows closed. However, when-

ever you do unplug the air purifier, have a power outage, turn off the unit for some other reason,

or remove the face-plate to clean the pre-filters, the memory of the 'clean air reference' will be

erased and you will need to repeat these procedures to establish a new ‘clean air reference.'

AUTOMATIC OPERATION - Setting & Using “Auto” Mode

Your advanced technology air purifier is equipped with a sophisticated air quality sensor capable of

detecting elevated levels of odor, dust, or irritants in the air. When set to “AUTO” using the unit’s

Flow button, the air purifier automatically adjusts its operational mode (switching between LOW and

MED) according to the indoor air pollution levels detected by the sensor. , to use theHOWEVER

unit’s AUTO function you first program a 'clean air reference' using the procedures describedMUST

below setting the unit’s AUTO function.BEFORE

IMPORTANT: attempt to use the Auto Setting if you have any unusual air quality conditionsDO NOT

such as mold, mildew, tobacco smoke, a wood-burning fireplace, pets, freshly painted walls, new

flooring or new carpeting that is still ‘out gassing’ chemical fumes, etc. Such conditions will not allow

the air purifier's sensor to accurately establish a "clean air reference" on which to base the Auto Setting.

If these conditions exist, simply set the unit to MEDIUM or HIGH and operate manually without any

further set up as described above in the section entitled BASIC OPERATION - Manually Operating

YourAir Purifier.

Programming A Clean Air Reference

1. Turn on your air purifier and IMMEDIATELY push the FLOW button to set the unit on HIGH and let it run

continuously for 3 hrs with the UV light ON to purify the air in the room.

2. Leaving the machine with power set to ON, UNPLUG it from the wall for 10 seconds.

3. PLUG it back in. The odor indicator light will blink as it samples and memorizes the existing purified air

condition. After two minutes, the indicator light will stop blinking to indicate the end of memorization.

(The existing indoor air quality will then serve as the baseline definition for 'Clean Air').

4. Push the FLOW button to set the unit on AUTO and leave it on that setting. 'SET IT AND FORGET IT'.

5. Using the established 'clean air reference,' the air quality sensor will then detect changes in air quality

that exceed the reference point and adjust the unit's settings accordingly. Of course, you can always put

it on the other speed settings, such as QUIET for sleeping or on HIGH if you are, for example, expecting

company and want the air to be cleaned faster.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Alive Air Air Purifier Owner's Manual Page 7