Alive Air Air Purifier Owner's Manual download pdf (Page 9)

Before starting any cleaning or maintenance, always turn-off and unplug the unit.

After unplugging, either leave the unit upright or carefully lay it down face-up. Disassemble the unit

in sequence of 1 to 5 as shown below. (Put the unit back together in the reverse 5 to 1 sequence.)

1. Remove the Front Face Plate

2. Remove Washable Black Mesh Pre-Filter

4. Remove the HEPA/Activated Charcoal Filter

3. Remove the Washable Electronic Grid

Disassembling the Alive Air

5. Remove the TiO2 Filter

Hold the clips of both sides to help pulling

out the filter.

Alive Air 9-Stage Air Purifier Owner’s Manual

Push the electronic grid towards the bottom of the device

Hold the two tabs and lift up the electronic grid

Push the electronic grid towards the bottom of the device

Place your hand in position A and pull out the filter.

When replacing the Filter, please reinsert in the exact

front-and-back direction indicated by the arrows on the side.

The white HEPA Filter should face you and the black

Activated Carbon Filter should face the unit.

CLEANING AND MAINTENANCE

(

Cont.

)

Gently lift up the front cover at a 45° angle as shown

IMPORTANT: DoThese disassembly instructions are provided as a general guide. You needNOT

to fully disassemble the unit to clean an individual component or filter.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Alive Air Air Purifier Owner's Manual Page 9