Alive Air Air Purifier Owner's Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
13
FREQUENTLY ASKED QUESTIONS
(
Cont.
)
Filter
Why is it so hard for the filter to get rid of dust and odors?
Have the front and back of the HEPA/Charcoal filter been mistakenly reversed?
The HEPA/Charcoal filter has been saturated with a serious amount of dust (causing it to appear dark grey in
color) or Febreeze, Oust, smelly candles or Plug Ins have been used and it has saturated the charcoal filter.
Please replace filter.
Cannot Turn On the Unit
Why is the unit not working even after turning it on?
Has the plug been loosened or disconnected from the socket? Please check that the plug is properly
plugged in to an outlet.
Has something in the unit come loose in shipping or has it been properly reassembled after being cleaned?
Please check for either of these conditions. The unit will not operate if the Washable Electronic Grid or the
Front Face Plate has not properly been installed.
Electronic Grid
Why is it so difficult to eliminate dust and odor?
If the electrical discharge wires or the electronic grid get too dirty. Please refer to page 9 on how to clean
and maintain.
If an electrical discharge wire been disconnected or broken? Contact or call[email protected]
(800) 215-1689 for additional information and parts.
APPLICABLE AREAS
The unit is designed for any indoor room or living space up to 80 square meters or over 861 square feet.
It can be used in living or family rooms, bedrooms, offices, studios, waiting rooms, hotels, hospitals, etc.
If the unit is to be used in a smaller room, you may prefer to have the power setting on medium or low.
Despite what you may believe or have been told, air does not easily move through doorways. As a result,
you might either need multiple units if you want to clean adjoining rooms or you would have to move the
purifier to the other areas to be cleaned.
Alive Air 9-Stage Air Purifier Owner’s Manual
Odor Sensor
Why doesn't the Odor Sensor work?
In the initial set-up of the unit, the Odor Sensor wasn’t properly trained, you unplugged the air purifier, had a
power outage, turned off the unit for some other reason, or removed the face-plate to clean the pre-filters.
Please reestablish a ‘Clean Air Reference’ following the instructions provided on page 6 of this manual.
When first purchased or when the unit has been unplugged for more than a week, the sensor will not be as
sensitive. After 1 to 2 days of operation, the sensor will regain its sensitivity.
Page view 13
1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments